Customer Feedback

Hi Paul,

I ordered the Stablizing System from you and I installed it on the trailer mentioned below.
From the time I ordered it, which was on a Wednesday, you had it sitting on my doorstep the following Monday, and thats even in a different Country.
I Installed it today and it took me under 2 hours to do this. I set the trailer up and walked around in the trailer and I couldn.t believe how much the the movement was taken out by this system. Like you say it makes it rock solid. I would recomend this system to anybody that asks about it. Actually this system should be factory installed on all trailers pull or fifth wheel right from the factory.
Again Thanks very much
Don Hall (note: trailer is 28 foot Rockwood located in British Columbia)


Paul,
We just pulled in from Carson City with the trailer. The hitch worked great! We had plenty of trucks passing and had some very gusty winds between Reno and Truckee on the way back. I would recommend the hitch to anyone who wants a nice stable tow trailer. The SteadyFast worked great. We even slept through a small earthquake on Friday night. Now that we have used the stabilizers, I can't picture not using them. Our sincere thanks for all of your help and assistance with both the hitch and the stabilizers.
Dave (note: trailer is 30 foot Wildwood, Hitch is Hensley)



Hey Paul, (phone message)
This is Mark Waller in Southern California, Temecula. Just wanted to let you know I got the stabilizer installed on my Challenger trailer today and oh what a difference. It was actually a pretty easy install. So thank you very much for a great product ,talk to you soon, good bye.
Ebay feedback from Mark: What a great product! Instructions were as good as the product!!!!!!!!!!


Hello Paul,

This is just a brief word to follow up on our purchase and your installation of our Steadyfast stabilizing system.

We have used our 38' Teton fifth wheel trailer several times since I saw you last, and have had sufficient opportunities to test out our Steadyfast stabilizers, both as to ease of use when hitching and unhitching, and especially as to living in the trailer with the stabilizers in operation. I am very pleased not only with the ease of use (which could hardly be simpler than it is), but especially with the degree of stabilization achieved.

I seem to be more sensitive to "trailer movement" than most RVers; I really don't like it at all. That is why, prior to your installation of our new Steadyfast stabilizers, I had employed: (1) a "crossbar"
stabilizer between our landing gear legs (which itself was a replacement and improvement for our previous kingpin tripod stabilizer); (2) two scissor jacks stabilizers located mid-coach; and finally, (3) a custom "tensioner" stabilizer pressed against the rear skid cylinder.

With all these stabilizers in operation, together with our trailer's own built-in rear stabilizers, we were able to achieve very good stabilization. The problem was, however, that considerable time (at least 30 minutes) and effort was involved in getting all those stabilizers in place and operational. I had to be on my knees continually (and briefly even on my back) in order to make everything work. Besides this, I had to allow a fair amount of storage space for the front and rear stabilizers, when stowed away for travel.

Now, with the Steadyfast stabilizers installed and operational, not only do I no longer need to dedicate any storage space for stabilizing devices, but, best of all, all of the time and
(unpleasant) labor required to set up my old stabilizers has been completely eliminated.

Further, it seems to me that the degree of stabilization achieved with our Steadyfast stabilizers is fully equal to that of our old cumbersome and labor-intensive (albeit effective) stabilizing devices. To me, the cost of the Steadyfast system installed is well worth it--and then some. It is just great to be able to get rid of all of our old stabilizers (while gaining back the storage space they required), while achieving the same degree of stabilization as before, yet with practically no time and effort involved.

I would just like to say as well that the quality of your installation work was outstanding, and that it was a pleasure meeting you.

Thank you,

Jim Coram (Note: Jim also used 4 Rotochocks on his trailer, he only uses two now just for safety)



Paul,
The system installed easily and works great.
David Willison



Paul,
Just installed our Steadyfast on our 38' Pilgram Open Road, and wanted to let you know what you already know. It is solid, even when someone walks up the steps! Install went without a hitch. Thanks for a great product.
Raymond Borel



The Steadyfast Stabilizer made my tripod obsolete--it's great
Mark and Deanna

We have already installed our SteadyFast and LOVE it !!!!! Let us know if you need additional testimonials. We talk to a lot of people about it when we're out with our camper...
Marianna

Its amazing how tight the trailer is. Simple to install with common tools. It is totally different.
I really like this! I really like this! I really like this! (While unsuccessfully attempting to shake front of trailer)
I have his unit on my Montana and on a small 20' pull trailer. There is virtually no movement with this stabilizer deployed. It has done such a good job that I have sold my tri-pod because I don't need it any more.
It took several hours with a good drill and some patience, but it is a DIY project. Mariana ran off to Bodega Bay by herself, and reports the trailer is now rock solid. Thank you for your help and innovation.
The system works great. Thanx again for a great product and easy installation.
We mounted the SteadyFast stabilizers and have no sway side to side or front to back. You can push against the side at the front by the drop down front jacks and get no movement at all. Same in the back.

0 Comments